Occupation Health & Safety Workplace Death Versus Murder - Sample

Question: Discuss about the Occupation Health Safety Workplace Death Versus Murder. Answer: Introduction The OHS is an abbreviation Occupation Health and Safety. According to the Australian law it has found that they must ensure healthy and safe work environment and provide them a complete rehabilitation system which gives the surety about no worker should be get injured and proper advantages will be provided to every worker. It has found that there is increase in death rate has been found due to the lack of knowledge, unawareness and proper environment (Perez, 2016). The proper protection and safety is required for the welfare of workers engaged in working with in the industry. It is the basic human right of each and every worker that they must enjoy the high standard of security level that ensures human right that should be in access of all workers. The author of the study stated that no matter what is the nature of the workers work, it is important to analyze those factor that are safe and secure and the environment of work will be free from hazard so ever worker should carried out h is or her responsibilities in a safe and secure manner. The right belonging to safety and security in a proper legislation manner and the must get all the clear and related knowledge about all the related obligations and also about the consequences for neglecting the obligation sated in the agreement provided by the legislative authorities. The author of the study stated that it is very important to focus on all the related issues that are required to look up for the safety and security purpose of their working. It has found that one of the most important issues faced by the OHS is related to death issue of workers and this report will follow the analysis and discussion on the related death issues (Reynolds, 2014). Research analysis It has been analyzed by the fact that diseases and injury of at workplace destroyed the quality of life, family and social activities and its also affect the prospects of job and stop advancement in career development. According to the research it has found that in every 2 to 3 min an Australian worker is getting injured badly which the reason of increasing death. It has been found that the Australia has the second highest rate of death in the whole world and this due to the mesothelioma which is a rare cancer that is caused by the exposure of asbestos (Bai, 2016). This killing cancer has been leaving a mark on the nation and it has been analyzed that the people has been succumbed to this disease from the beginning of 1980s. This is a disease that has been destroying those of them who are the part of any trade which circumstances are discussed in other points. From the history of asbestos use it has found at an extensive stage that is corresponds with the Australian high incidence of mesothelioma. According to the expert analysis it has found that the world has been record at its highest rate on per capita use of asbestos in the period of 1920 to 1970. The asbestos exposure among trade has been monitor by the Australian community; in addition to this they have further added that the some of the occupation has the highest rate of exposure risk such as asbestos mining and those works that are the reason for the production of dust includes sanding, sawing, grinding, handling and sawing asbestos contaminated materials. These all the factor that are composed of high material of risk that is associated with the occupation is one of the biggest issue of the asbestos material that are the reason of the high death rate cause. Some of the specific high risk jobs are associated with the power plant workers, boiler workers, naval workers, railway workers and carpenters. This is the main cause that is need to be focused from all of the aspects in order to save the workers from the injured and to decrease the death rate (Beziu, 2014). In the late on twentieth and early period of 21st centuries it has been considered inadequate to punish the corporation for the death caused by the activities of the organization, the organization will never take responsibilities at its own. In addition to resolve this issue an act has addressed that is the corporate Manslaughter and corporate Homicide Act that has crated in offence with the corporate homicide and corporate manslaughter. This is based on the breach of a duty that is relevant to the organizations and according to the law it has stated that organizations will be responsible for any type of activities that are related to man slaughtering. Discussion It has been discussed here after the analysis that the main cause of the high rate of death that has been found in Australia is due to the asbestos material that has associated with number of occupation that are elaborating the higher rate of exposure risk. This risk is needed to be minimizing in order to save the workers from injuries that are letting them towards deaths. It has analyzed that the high number of risk has been associated with occupation are the major source of death that need to minimized in order to ensure the healthy and safe environment. A proper code of practice has been implemented with the intention to manage and control asbestos in the workplace by the safe work Australia. This is basically providing them that how they could respond against the exposure threats of asbestos. It has been found that they are working. It has been found after the analysis that industries are now working to provide the proper guidance and knowledge to the customers in order to ensure the healthy and safe environment. The reasons that has been identified in analysis, that some of the factors includes sanding, sawing, grinding, handling and sawing are the asbestos contaminated materials that are creating problems in the work environment and is identified as the number of death increase rate (Arian, 2014). It has found that in the previous era the organizations denied by responsibility of cause of the death of workers, but after the law of act it is considered by the organization at its own responsibilities. This is basically considered as man slaughtering that is cause by the irregularities and non-serious attitude of the organization. Conclusion It has been concluded at the end that the OHS is a committee that is responsible for the health and safety of their workers. It has found an issue that an increase number of death related issue has been found due to the improper health and safety environment. This issue is fund at its high and is due to the reason of not following the obligation. The legislation has been stated that it is very important for the workers to follow all the rules and regulations so that they could be save from all sorts of death incidents. It has found that this high rate of injury in the industries are baldy affecting workers social and personal life and as well as their career health which letting them into no career development. It has been found that the Australia has the second highest rate of death in the whole world and this due to the mesothelioma which is a rare cancer that is caused by the exposure of asbestos. The many of the occupation has been associated with the number of risk that need to be minimized in order to save worker from the hazards that are necessary to ensure the healthy and safe environment for workers to work on. A proper code of practice has been implemented with the intention to manage and control asbestos in the workplace by the safe work Australia (Beck, 2016). The asbestos are one of the major factors that are pointing Australia as the second highest rate of death all around the world. Recommendation To get save from the asbestos related death issue it is important to focus on all the recommended steps so that the workers life will be saved and secured. Under the circumstances of save work Australia the body of the government nation should oversees on the proper handling of the asbestos material in the workplace. The act that has been stated by the Australias work for health and safety regulation act which has set some the major laws for the proper and reasonable management of asbestos in the work place, for this purpose it has been recommend at the end that is stated as follows. They must handle those of the asbestos that occurs naturally They should work with proper function in order to remove the asbestos They must conduct proper training sessions that provides proper and proficient training to asbestos worker They must focus on the fulfillment of complete and proper licensing requirements of abatement professionals They must provide information and guidance to the workers how to identify the materials that are related to asbestos and how workers properly report about the asbestos and how they will manage to the exposure of risk prior to the job settings (Rahman, 2013). They must provide proper knowledge and information to the workers in order to save them from any type of danger related to asbestos material It has been recommend them to design the proper inspection team that are focused on the prevention of asbestos material References Perez-Prado, A., 2017. Occupation Health and Safety ensures by Australia .HOW Journal,10(1), pp.53-66. Reynolds, C., 2014, January. G4: Lean On Me: diseases and injury of at workplace destroyed the quality of life in Austrailla. In2017 NAGC SYMPOSIUM(p. 135). Bai, Y., Dou, Y., Xie, L.H., Rutledge, W., Li, J.R. and Zhou, H.C., 2016. The asbestos related material and its prevention ns.Chemical Society Reviews,45(8), pp.2327-2367. Bezu, S., Kassie, G. T., Shiferaw, B., Ricker-Gilbert, J. 2014. Impact of improved license adoption on welfare workers to save them from form hazards: A panel data analysis.World Development,59, 120-131. Adrian, T., Shin, H. S. 2014. Asbestos death rate at Australia Review of Financial Studies,27(2), 373-403. Beck, T., Demirg-Kunt, A., Merrouche, O. 2013. Implementation of proper taring to worker to identify the asbestos material 37(2), 433-447. Rahman, M. L., Banna, S. H. 2013.to ensure the healthy and safety environment to the workers in the trade industry .Journal of Business and Technology (Dhaka),10(2), 18-35.